L298 Big Module Red Board (Dual H-Bridge Motor Driver Using L298N)

The double H-Bridge driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15-lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC, and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the connection of an external sensing resistor. An additional supply input is provided so that the logic works at a lower voltage. Specification Driver: L298N Driver power supply: +5V~+46V Driver Io: 2A Logic power output Vss: +5~+7V (internal supply +5V) Logic current: 0~36mA Controlling level: Low -0.3V~1.5V, high: 2.3V~Vss Enable signal level: Low -0.3V~1.5V, high: 2.3V~Vss Max power: 25W (Temperature 75°C) Working temperature: -25C°~+130°C Dimension: 60mm x 54mm Driver weight: ~ 48g Other extensions: current probe, controlling direction indicator, pull-up resistor switch, logic part power supply.

Handling & Safety

Always confirm rated voltage and current before wiring the motor driver module into a circuit. Avoid touching live terminals, and keep it away from moisture and static discharge during handling. These steps protect the part and keep you safe.

Why Choose This Motor Driver Module

First, it is a widely used part in electronics workshops and the maker community, so documentation and wiring references are easy to find. Second, the rated values are clearly specified, so you can match it to your project with confidence. Third, our team checks basic function before it ships. So, you avoid guesswork when you order. As a result, this is a dependable choice for repair, prototyping or finishing a project.

Wiring Tips

Before final assembly, test the part on a bench supply if you are unsure of the wiring. Therefore, you avoid damaging your main circuit during first power-up. Also, keep connections short and secure to reduce noise and contact issues. In addition, label each wire during assembly so future troubleshooting is easier. As a result, your project stays reliable and easy to maintain.

Good to Know

A well-matched motor driver module saves time on debugging later. Therefore, double-check the rated voltage and current against your other components before wiring everything together. Also, keep the original packaging until you have tested the part, since this makes any exchange easier if something is not right. In addition, bookmark the manufacturer’s documentation for quick reference during your build. As a result, your project moves forward with fewer surprises.

L298 Big Module Red Board (Dual H-Bridge Motor Driver Using L298N)

L298 Big Module Red Board (Dual H-Bridge Motor Driver Using L298N) موديول تحكم في المحركات مخصص لـ التحكم في سرعة واتجاه محرك DC.

الاستخدامات

• مشاريع الروبوتات وCNC
• المشاريع المزودة بمحركات ذاتية
• مشاريع الأتمتة
• التحكم في حركة عربيات الروبوت

ملاحظات الأمان

تأكد دايمًا من الجهد والتيار المقنن قبل توصيل موديول تحكم في المحركات في الدائرة. تجنب لمس الأطراف وهي شغالة، وخليه بعيد عن الرطوبة والشحنات الساكنة أثناء التعامل معاه. هذه الخطوات بتحمي القطعة وتحافظ على سلامتك.

ليه تختار موديول تحكم في المحركات ده

أولاً، قطعة مستخدمة بشكل واسع في ورش الإلكترونيات ومجتمع الصناع، فتلاقي شروحات ومراجع توصيل بسهولة. ثانيًا، القيم المقننة موضحة بدقة، فتقدر تطابقها مع مشروعك بثقة. ثالثًا، بنتأكد من الوظيفة الأساسية قبل الشحن. فهو اختيار موثوق للإصلاح أو التجربة أو إنهاء مشروعك.

تقدر تستعرض باقي الموديولات الإلكترونية والإكسسوارات عندنا لمشروعك القادم.