MOSFET Trigger Switch Driver Module PWM Regulator 4V∼60V
215,00 EGP
SKU:
102220
Category: Sensors & Modules
Description
MOSFET Trigger Switch Driver Module PWM Regulator 4V∼60V
Highlights
:
- The module supports high-level trigger, low-level trigger, switch control, PWM control;
- The use of imported dual-MOS parallel active output, lower internal resistance, current, power strong, continuous current at room temperature is 10A, 600W, to meet most of the equipment used;
- Wide voltage input: DC 4V ~ 60V;
- Easy to control high-power equipment.
Note:MOSFET Trigger Switch Driver Module PWM Regulator 4V∼60V
- At the same time, there is only one signal to control the module, can not use two or more signals to control the module;
- High level trigger voltage range: DC3.0V ~ 24V, the trigger signal in the 3.0V ~ 24V, MOS tube conduction; less than 0.6V, that is 0V ~ 0.6V, MOS tube is closed; signal voltage must not 0.6V ~ 3.0V, because the MOS tube is not fully open, high-power output will burn MOS;
- Low-level trigger voltage range: DC 0V ~ 0.6V, that trigger signal in the 0V ~ 0.6V, MOS tube conduction; higher than 3.0V, MOS tube is closed; signal voltage must not be 0.6V ~ 3.0V , Because the MOS tube is not fully open, high-power output will burn MOS.
Product parameters:
- Operating voltage: DC 4V – 60V;
- Trigger source: high level trigger (DC3.0V – 24V), low level trigger (DC 0.0V ~ 0.6V), switch control, can connect MCU IO port, PLC interface, DC power supply, etc. PWM signal, support signal frequency range of 0 – 2.5KHZ.
- Output capacity: DC 4V – 60V, continuous current 10A at room temperature, power 600W! Auxiliary cooling conditions, the current up to 15A.
- Life: unlimited switch;
- Working temperature: -40-85 ℃;
- Size: 4.6 * 3 * 1.5cm
Applications:MOSFET Trigger Switch Driver Module PWM Regulator 4V∼60V
It can control high-power equipment, such as motors, bulbs, LED lights with, DC motors, micro-pumps, solenoid valves and so on. If you enter the PWM signal, you can control the motor speed, lamp brightness and so on.
Package Included:
1 x 10A 600W MOS FET Trigger Switch Drive Module PWM Regulator Control Current Panel
Shipping & Delivery
Reviews (0)
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “MOSFET Trigger Switch Driver Module PWM Regulator 4V∼60V” Cancel reply
Related products
DHT11 Digital Humidity and Temperature Sensor Module
Rated 0 out of 5
In stock
55,00 EGP
SKU:
100323


Reviews
Clear filtersThere are no reviews yet.