UNI-T UT-L20 Test Probe
199,00 EGP
مسبار UT-L20 test probe من UNI-T زوج مسابير عام بكم حماية للقابس المتقاطع، تصنيف CAT I 1000V/CAT II 600V وتيار 10A، أسلاك 900 مم، متوافق عام. | The UT-L20 test probe from UNI-T is a general-type probe pair with cross-plug shield sleeve, CAT I 1000V/CAT II 600V 10A, 900mm leads, universal fit.
UT-L20 test probe
The UT-L20 test probe from UNI-T is a general-type probe pair with a cross-plug connector and shield sleeve, designed to fit most multimeters and clamp meters as a universal replacement lead.
How It Works
Each probe has a 900mm lead, a 101mm rod, and a 16.5mm tip, built to resist heat evaporation up to 105C. The cross-plug-with-shield-sleeve connector design fits a wide range of multimeter and clamp meter input sockets without needing a brand-specific adapter, and the CAT I 1000V/CAT II 600V 10A rating covers common bench and light field measurement work.
Key Features
- Lead length: 900mm | Rod length: 101mm | Tip length: 16.5mm
- Cross-plug connector with shield sleeve
- Safety rating: CAT I 1000V / CAT II 600V, 10A
- Heat-resistant up to 105C
- Universal fit for most multimeters and clamp meters
Typical Applications
- Replacing worn or damaged general-purpose multimeter leads
- Universal-fit testing across different meter brands
- General voltage, resistance, and continuity checks
Specifications
Lead length: 900mm | Rod length: 101mm | Tip length: 16.5mm | Safety rating: CAT I 1000V / CAT II 600V, 10A | Heat resistance: up to 105C | Package: 1 pair
Getting Accurate Readings
Before taking any measurement, confirm the test leads sit in the correct input jacks for the function selected, because leaving a lead in the current jack while measuring voltage is the single most common way a meter’s internal fuse gets blown. Start on the highest range when the expected value is unknown, then step down until the display shows useful resolution.
Keep the probe tips clean and check the leads for cracked insulation regularly, since a damaged lead is both a safety risk and a source of unstable readings. Replace the battery as soon as the low-battery indicator appears, because a weak cell can quietly skew resistance and continuity results well before the meter shuts down completely.
Reference: UNI-T UT-L20 product specifications | More UNI-T Measuring Instruments
UT-L20 test probe
مسبار UT-L20 test probe من UNI-T زوج مسابير عام بموصل قابس متقاطع وكم حماية، مصمم عشان يناسب معظم الملتيميترات وأجهزة الكلامب ميتر كسلك بديل عام.
إزاي شغالة
كل مسبار طول سلكه 900 مم وقضيبه 101 مم وطرفه 16.5 مم، ومصمم عشان يتحمل الحرارة لحد 105 درجة مئوية من غير تبخر. تصميم الموصل بالقابس المتقاطع وكم الحماية بيناسب مجموعة واسعة من مقابس دخل الملتيميتر والكلامب ميتر من غير الحاجة لمحول خاص بماركة معينة، وتصنيف CAT I 1000V/CAT II 600V بتيار 10A بيغطي أعمال القياس الشائعة في المعمل والميدان الخفيف.
المواصفات الأساسية
- طول السلك: 900 مم | طول القضيب: 101 مم | طول الطرف: 16.5 مم
- موصل قابس متقاطع بكم حماية
- تصنيف الأمان: CAT I 1000V / CAT II 600V، 10A
- مقاوم للحرارة حتى 105 درجة مئوية
- متوافق عام مع معظم الملتيميترات وأجهزة الكلامب ميتر
الاستخدامات
- استبدال أسلاك الملتيميتر العامة التالفة أو المتآكلة
- اختبار متوافق عبر ماركات أجهزة مختلفة
- فحوصات الفولت والمقاومة والاستمرارية العامة
المواصفات الفنية
طول السلك: 900 مم | طول القضيب: 101 مم | طول الطرف: 16.5 مم | تصنيف الأمان: CAT I 1000V / CAT II 600V، 10A | مقاومة الحرارة: حتى 105 درجة | العبوة: زوج واحد
إزاي تاخد قراءات دقيقة
قبل أي قياس، اتأكد إن أسلاك الاختبار متركبة في المقابس الصح للوظيفة المختارة، لأن سيبان سلك في مقبس التيار وانت بتقيس فولت أشهر سبب لحرق الفيوز الداخلي بتاع الجهاز. ابدأ بأعلى مدى لما القيمة المتوقعة مجهولة، وبعدين انزل بالتدريج لحد ما الشاشة تدي دقة مفيدة.
خلي أطراف المسبار نضيفة وافحص الأسلاك من أي تشقق في العزل بانتظام، لأن سلك تالف خطر أمان ومصدر لقراءات غير مستقرة. غير البطارية أول ما مؤشر البطارية الضعيفة يظهر، لأن بطارية ضعيفة ممكن تحرف قراءات المقاومة والاستمرارية من غير ما تحس.
منتجات مشابهة
UNI-T UT33B+ Palm Size Multimeter
مش متوفر


الآراء
Clear filtersلسه مفيش تقييمات.