UT275 Clamp Earth Ground Tester

29.055,48 EGP

فاحص UT275 لمقاومة الأرضي بيشارك فك UT273 28 مم وقياس مقاومة أرضي بتصميم كلامب بدقة 0.01 أوم، في نفس جيل سلسلة UT270 بتاعة UNI-T. | The UT275 earth ground tester shares the UT273’s 28mm jaw and 0.01Ohm-resolution clamp-style earth resistance measurement, sitting in the same generation of UNI-T’s UT270 series.

Description

UT275 Clamp Earth Ground Tester

The UT275 earth ground tester shares the UT273’s 28mm jaw and 0.01Ohm-resolution clamp-style earth resistance measurement, sitting in the same generation of UNI-T’s UT270 series.

UT275 earth ground tester – How It Works

Like the UT273, clamping its jaw around a grounding conductor measures loop resistance directly without disconnecting anything or driving auxiliary stakes, while a separate mode reads leakage current up to 30A on the same clamp. Its accuracy on the lower leakage-current range (0-299mA) is specifically rated at plus-or-minus 2.5% plus 2mA, giving confidence on smaller leakage readings as well as larger fault currents.

It carries the same auto range, data hold, and resistance limit alarm as its sibling models, built to IEC61010 safety standards for field electrical work.

Key Features

  • Clamp-style ground resistance from 0.01Ohm, 0.001Ohm resolution
  • 28mm jaw opening
  • Leakage current 0-299mA at +/-2.5%+2mA, up to 30A total
  • Auto range, data hold, resistance limit alarm

Typical Applications

  • Grounding system verification without disconnecting the line
  • Small and large leakage-current fault diagnostics
  • Telecommunications and power system earth checks

Specifications

  • Resistance: from 0.01Ohm, 0.001Ohm resolution
  • Leakage Current: 0-299mA (+/-2.5%+2mA), up to 30A
  • Jaw Opening: 28mm
  • Safety: IEC61010 standard

Safe Testing Practice

Always confirm the circuit is fully de-energized and isolated before applying a test voltage, because insulation testers deliberately output high voltage and connecting one to a live circuit is dangerous to both the operator and the instrument. Discharge the tested equipment afterwards, since cables and windings can hold a charge long enough to deliver a shock minutes later.

Disconnect sensitive electronics from the circuit before testing, as the applied test voltage can damage semiconductors and surge protection devices that were never designed to see it. Record readings alongside ambient temperature and humidity, because insulation resistance varies significantly with both and a trend over time tells far more than a single absolute number.

Reference: electrical grounding measurement — browse our full range of UNI-T measuring instruments.


UT275 Clamp Earth Ground Tester

فاحص UT275 لمقاومة الأرضي بيشارك فك UT273 28 مم وقياس مقاومة أرضي بتصميم كلامب بدقة 0.01 أوم، في نفس جيل سلسلة UT270 بتاعة UNI-T.

UT275 earth ground tester – إزاي شغالة

زي UT273، قفل الفك حوالين موصل التأريض بيقيس مقاومة الحلقة مباشرة من غير فصل حاجة أو دق أقطاب مساعدة، ووضع منفصل بيقرا تيار تسريب لحد 30 أمبير على نفس الكلامب. دقته على مدى تيار التسريب الأقل (0-299 ميلي أمبير) مصنفة بالتحديد بـ2.5% زائد 2 ميلي أمبير، وده بيدي ثقة على قراءات تسريب أصغر مع تيارات عطل أكبر.

بتحمل نفس المدى التلقائي وتجميد القراءة وإنذار حد المقاومة زي إخواتها، مبنية على معايير سلامة IEC61010 للشغل الكهربائي الميداني.

المواصفات الأساسية

  • مقاومة أرضي بتصميم كلامب من 0.01 أوم، دقة 0.001 أوم
  • فك كلامب 28 مم
  • تيار تسريب 0-299 ميلي أمبير بدقة 2.5%+2 مللي أمبير، لحد 30 أمبير إجمالي
  • مدى تلقائي، تجميد قراءة، إنذار حد مقاومة

الاستخدامات

  • التحقق من نظام التأريض من غير فصل الخط
  • تشخيص أعطال تيار تسريب صغيرة وكبيرة
  • فحوصات أرضي لأنظمة اتصالات وطاقة

المواصفات الفنية

  • المقاومة: من 0.01 أوم، دقة 0.001 أوم
  • تيار التسريب: 0-299 ميلي أمبير (2.5%+2مللي أمبير)، لحد 30 أمبير
  • فتحة الفك: 28 مم
  • السلامة: معيار IEC61010

ممارسات اختبار آمنة

دايمًا اتأكد إن الدائرة مفصولة ومعزولة تمامًا قبل ما تطبق فولت اختبار، لأن أجهزة اختبار العزل بتطلع فولت عالي عن قصد وتوصيلها بدائرة حية خطر على المشغل والجهاز. فرّغ المعدة المختبرة بعد الاختبار، لأن الكابلات والملفات ممكن تحتفظ بشحنة كافية تدي صدمة بعد دقايق.

افصل الإلكترونيات الحساسة من الدائرة قبل الاختبار، لأن فولت الاختبار المطبق ممكن يضر أشباه الموصلات وأجهزة الحماية من التيار العالي اللي ماتصممتش تشوفه. سجل القراءات مع حرارة ورطوبة الجو، لأن مقاومة العزل بتتغير كتير مع الاتنين والاتجاه مع الوقت بيقول أكتر بكتير من رقم مطلق واحد.

لمزيد من التفاصيل التقنية راجع قياس التأريض الكهربائي على ويكيبيديا، وتصفح باقي أجهزة قياس UNI-T المتوفرة عندنا.

Shipping & Delivery
Reviews (0)
0 reviews
0
0
0
0
0

الآراء

Clear filters

لسه مفيش تقييمات.

كن أول من يقيم “UT275 Clamp Earth Ground Tester”

بريدك الإلكتروني مش هيتنشر. الخانات المطلوبة معلّمة بـ *

لازم تكون مسجل دخول عشان تقدر تضيف صور لمراجعتك.