Soldering Iron Tip Black beveled

Professional Black Beveled Soldering Iron Tip for Drag Soldering

The Black Beveled Soldering Iron Tip (often designated as the 3C or 4C style) serves as a specialized tool for high-efficiency surface mount (SMD) soldering. This tip features a flat, slanted face—resembling a hoof—that holds a small reservoir of molten solder. Professional technicians choose the black-finished series for its superior heat retention and enhanced resistance to oxidation during long-duration repair sessions.

Precision “Hoof” Design for Multi-Pin ICs

The beveled geometry excels at drag soldering, a technique where you slide the tip across multiple pins of an integrated circuit (IC) in one smooth motion. This slanted face allows surface tension to pull excess solder away from the pins, which prevents bridges and ensures clean, uniform joints. Specifically, the black coating on the non-working surfaces of the tip resists solder “creeping” up the shaft. This ensures that the heat and the solder stay concentrated at the very point of contact, providing you with maximum control over delicate QFP and SOIC components.

Industrial Build and Thermal Stability

We construct this tip using a high-purity oxygen-free copper core, which provides near-instantaneous heat transfer from the element to the workpiece. The “black” series tips undergo an additional multi-layer plating process that includes thick iron and chrome to withstand high temperatures without pitting.

Moreover, the working face arrives pre-tinned to prevent immediate oxidation. This universal 900M-series tip fits a wide range of popular soldering stations, including Hakko, Atten, Quick, and TOPLIA models. Whether you are performing professional motherboard repair or building a custom keyboard, this black beveled tip delivers the professional-grade thermal mass required for consistent, high-quality results.

Technical Specifications

• Feature: Specification
• Tip Style: Beveled / Hoof (Type C)
• Series: 900M-T (Universal Standard)
• Color/Finish: Black Oxide (Anti-Oxidation Coating)
• Core Material: Oxygen-Free Copper (OFC)
• Bevel Diameter: Approx. 3.0 mm to 4.0 mm
• Compatibility: 936, 937, 852D, 898D, and most 900M Stations
• Inner Diameter: 4.0 mm
• Outer Diameter: 6.0 mm

Handling & Safety

Always let the soldering iron tip reach a safe temperature before touching the tip or nozzle, and keep it away from flammable materials, cables and skin. Use a stand or holder when it is not in use, and work in a ventilated area. These steps protect your equipment and keep you safe.

Why Choose This Soldering Iron Tip

First, it is a widely used part in electronics and repair workshops, so it fits most technicians’ setups easily. Second, the wattage and specifications are clearly stated, so you can match it to your task with confidence. Third, our team checks basic function before it ships. So, you avoid guesswork when you order. As a result, this is a dependable choice for repair, assembly or finishing a project.

Usage Tips

Before heavy use, warm up the tool and test it on scrap material if you are unsure of the heat setting. Therefore, you avoid damaging your workpiece during the main job. Also, clean the tip regularly to keep heat transfer efficient. In addition, let the tool cool fully before storing it. As a result, your equipment stays reliable and easy to maintain.

Good to Know

A well-matched soldering iron tip saves time on the job later. Therefore, double-check the wattage and tip or nozzle size against your task before relying on it for daily work. Also, keep the original packaging until you have tested the tool, since this makes any exchange easier if something is not right. In addition, keep the tool clean and stored properly between uses. As a result, your toolkit stays reliable with fewer surprises.

Soldering Iron Tip Black beveled

Soldering Iron Tip Black beveled طرف كاوية لحام مخصص لـ تركيز الحرارة بدقة عند نقطة التلامس للحام.

الاستخدامات

• لحام المكونات دقيقة الأرجل
• الإصلاح والريورك العام
• استبدال الأطراف التالفة
• اللحام الدقيق للإلكترونيات

ملاحظات الأمان

خلي طرف كاوية لحام يوصل لدرجة حرارة آمنة قبل ما تلمس الطرف أو الفوهة، وخليه بعيد عن المواد القابلة للاشتعال والكابلات والجلد. استخدم حامل أو ستاند وقت ما مش بتستخدمه، واشتغل في مكان جيد التهوية. هذه الخطوات بتحمي معداتك وتحافظ على سلامتك.

ليه تختار طرف كاوية لحام ده

أولاً، أداة مستخدمة بشكل واسع في ورش الإلكترونيات والإصلاح، فتتناسب مع معظم تجهيزات الفنيين بسهولة. ثانيًا، القدرة والمواصفات موضحة بدقة، فتقدر تطابقها مع مهمتك بثقة. ثالثًا، بنتأكد من الوظيفة الأساسية قبل الشحن. فهو اختيار موثوق للإصلاح أو التجميع أو إنهاء مشروعك.

تقدر تستعرض باقي كاويات اللحام والقصدير وأدوات الهواء الساخن عندنا لمشروعك القادم.