74573 LOGIC GATE
30,25 EGP
دائرة SN74573 لاتش شفاف نوع D بـ8 بت بمخارج ثلاثية الحالة — مكافئة وظيفيًا لـ74373 (موجودة كمان في الكتالوج)، بس كل المداخل على جانب واحد من التغليفة وكل المخارج على الجانب التاني. | The SN74573 is an octal transparent D-latch with 3-state outputs — functionally equivalent to the 74373 (also in this catalog), but with all inputs on one side of the package and all outputs on the other.
SN74573 Octal D-Type Transparent Latch
The SN74573 is an octal transparent D-latch with 3-state outputs — functionally equivalent to the 74373 (also in this catalog), but with all inputs on one side of the package and all outputs on the other.
74573 – How It Works
Same behavior as the 74373 — transparent while enabled, holds data when disabled — but its input/output pin arrangement on opposite sides of the chip simplifies PCB routing in bus-buffering layouts where signal flow is meant to go straight through in one direction.
The choice between this and the 74373 usually comes down to PCB layout convenience rather than any electrical performance difference between the two.
Key Features
- 8-bit transparent latch
- 3-state outputs
- Inputs/outputs on opposite sides for easier routing
Typical Applications
- Temporarily holding data from a bus with simplified layout
- Decoupling read timing from write timing
- Display/control systems needing a held value
Datasheet Specifications
- Supply Voltage: 4.5V – 5.5V
- Logic Family: TTL
- Package: 20-pin DIP
For more background, see transparent latch operation: reference. Browse our full range of ICs and microcontrollers.
SN74573 Octal D-Type Transparent Latch
دائرة SN74573 لاتش شفاف نوع D بـ8 بت بمخارج ثلاثية الحالة — مكافئة وظيفيًا لـ74373 (موجودة كمان في الكتالوج)، بس كل المداخل على جانب واحد من التغليفة وكل المخارج على الجانب التاني.
74573 – إزاي شغالة
نفس سلوك 74373 — شفافة وهي مفعّلة، بتحتفظ بالبيانات لما تتعطل — بس ترتيب أطراف الدخل/الخرج بتاعها على جانبين متقابلين من الشريحة بيسهل توجيه PCB في تخطيطات تقوية باص محتاجة تدفق إشارة مباشر في اتجاه واحد.
الاختيار بينها وبين 74373 عادة بيرجع لراحة تخطيط PCB مش أي فرق في الأداء الكهربي بين الاتنين.
المواصفات الأساسية
- لاتش شفاف 8 بت
- مخارج ثلاثية الحالة
- مداخل/مخارج على جانبين متقابلين لسهولة التوجيه
الاستخدامات
- تخزين مؤقت لبيانات من باص بتخطيط مبسط
- فصل توقيت القراءة عن الكتابة
- أنظمة عرض وتحكم محتاجة قيمة محتفظ بها
المواصفات الفنية
- جهد التغذية: 4.5 – 5.5 فولت
- عائلة المنطق: TTL
- التغليف: DIP بـ20 رجل
لمزيد من التفاصيل التقنية راجع اللاتش الرقمي على ويكيبيديا، وتصفح باقي الدوائر المتكاملة والمتحكمات المتوفرة عندنا.
منتجات مشابهة
7448 BCD to 7-Segment Decoder Driver
متوفر
7474 D-type Flip Flop Counter or Delay Flip-flop
متوفر
7483 4-Bit Binary FULL ADDER With Fast Carry
متوفر
7485 4-bit Magnitude Comparator
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.