UTi720A Thermal Imager
22.014,00 EGP
كاميرا UTi720A thermal imager من UNI-T بدقة حرارية 256×192 ومدى -20 إلى 550 درجة مئوية وواي فاي وهيكل IP65 مقاوم للسقوط لتشخيص المباني. | The UTi720A thermal imager from UNI-T has 256×192 IR resolution, -20C to 550C range, WiFi, and IP65 drop-tested housing for building diagnostics.
UTi720A thermal imager
The UTi720A thermal imager from UNI-T is a 256 Pro Duty Series thermal camera with 256×192 IR resolution, built for electrical, mechanical, and building diagnostics where finding a hot or cold spot visually saves time over point-by-point probing.
How It Works
The UTi720A captures thermal images at 25Hz with 50mK sensitivity, covering -20C to 550C, and displays them on a 2.8-inch TFT screen (320×240) alongside a 640×480 digital camera for real-world reference. Thermal, visual, fusion, and picture-in-picture (PIP) modes let a technician overlay temperature data on the actual scene, and Wi-Fi connectivity supports transferring images for reporting. Focus-free optics, adjustable emissivity, and automatic high/low temperature alarms round out its feature set, with an IP65-rated, 2-meter drop-tested housing for rough job-site use.
Key Features
- IR resolution: 256×192 | Temperature range: -20C to 550C
- Thermal sensitivity: 50mK | Refresh rate: 25Hz
- 2.8in TFT display, 640×480 digital camera
- Thermal/visual/fusion/PIP image modes
- Wi-Fi, IP65, 2m drop-tested, focus-free
Typical Applications
- Electrical panel and connection hot-spot detection
- Building envelope and insulation diagnostics
- Mechanical equipment overheating checks
Specifications
IR resolution: 256×192 | Range: -20C to 550C | Sensitivity: 50mK | FOV: 56×42 degrees | Protection: IP65, 2m drop | Connectivity: Wi-Fi
Getting Reliable Thermal Images
Thermal imagers report apparent surface temperature, so emissivity settings and reflected background heat both influence the numbers shown on screen. Surfaces like bare metal or glass reflect surrounding heat sources and are notoriously difficult to measure accurately without applying a known-emissivity target to the spot being checked.
Let the camera stabilize after powering on and after any large ambient temperature change, because the detector needs a short warm-up before its readings settle. Keep the lens clean and never point the imager directly at the sun or an intense heat source outside its rated range, since that can permanently damage the sensor array.
Reference: UNI-T UTi720A product specifications | More UNI-T Measuring Instruments
UTi720A thermal imager
كاميرا UTi720A thermal imager من UNI-T كاميرا حرارية من سلسلة 256 Pro Duty بدقة حرارية 256×192، مصممة لتشخيص الكهرباء والميكانيكا والمباني لما إيجاد نقطة ساخنة أو باردة بصريًا بيوفر وقت عن الفحص نقطة بنقطة.
إزاي شغالة
جهاز UTi720A بيلتقط صور حرارية بمعدل 25 هرتز وحساسية 50 ميلي كلفن، بيغطي -20 إلى 550 درجة مئوية، وبيعرضها على شاشة TFT 2.8 بوصة (320×240) بجانب كاميرا رقمية 640×480 للمرجعية الواقعية. أوضاع حراري وبصري ودمج وصورة داخل صورة (PIP) بتسمح للفني بتراكب بيانات الحرارة على المشهد الفعلي، والواي فاي بيدعم نقل الصور للتقارير. البصريات من غير تركيز والانبعاثية القابلة للضبط وإنذارات الحرارة العالية/المنخفضة التلقائية بتكمل مميزاته، بهيكل IP65 مقاوم للسقوط من 2 متر لاستخدام مواقع العمل الصعبة.
المواصفات الأساسية
- الدقة الحرارية: 256×192 | مدى الحرارة: -20 إلى 550 درجة
- الحساسية: 50 ميلي كلفن | معدل التحديث: 25 هرتز
- شاشة TFT 2.8 بوصة، كاميرا رقمية 640×480
- أوضاع صورة حراري/بصري/دمج/PIP
- واي فاي، IP65، مقاوم للسقوط 2 متر، بدون تركيز
الاستخدامات
- اكتشاف النقاط الساخنة في لوحات وتوصيلات الكهرباء
- تشخيص عزل وواجهات المباني
- فحوصات ارتفاع حرارة المعدات الميكانيكية
المواصفات الفنية
الدقة الحرارية: 256×192 | المدى: -20 إلى 550 درجة | الحساسية: 50 ميلي كلفن | مجال الرؤية: 56×42 درجة | الحماية: IP65، سقوط 2 متر | الاتصال: واي فاي
إزاي تطلع صور حرارية موثوقة
الكاميرات الحرارية بتقرا حرارة السطح الظاهرية، فإعدادات الانبعاثية والحرارة الخلفية المنعكسة الاتنين بيأثروا على الأرقام الظاهرة على الشاشة. أسطح زي المعدن العاري أو الزجاج بتعكس مصادر حرارة محيطة وصعب جدًا قياسها بدقة من غير ما تحط هدف معروف الانبعاثية على النقطة اللي بتفحصها.
سيب الكاميرا تستقر بعد التشغيل وبعد أي تغير كبير في حرارة الجو، لأن الحساس محتاج فترة تسخين قصيرة قبل ما قراءاته تستقر. خلي العدسة نضيفة وما توجهش الكاميرا مباشرة على الشمس أو مصدر حرارة شديد برا مداها المقنن، لأن ده ممكن يضر مصفوفة الحساس بشكل دائم.
منتجات مشابهة
UNI-T UT33A+ Digital Multimeter
متوفر
UNI-T UT33B+ Palm Size Multimeter
مش متوفر
UT71E Series Intelligent Digital Multimeters
متوفر
UNI-T UT123D Smart Digital Multimeter
متوفر
UNI-T UT890C True RMS Digital Multimeter
متوفر
UNI-T UT890D+ Digital Multimeter
متوفر
UT81B Scope Digital Multimeter (Discontinued)
متوفر
UT205A 1000A Digital Clamp Meters (Discontinued)
متوفر
UT206A 1000A Digital Clamp Meters (Discontinued)
متوفر
UT207 Series 1000A Digital Clamp Meters (Discontinued)
متوفر
UT208B (AC/DC) 1000A True RMS Digital Clamp Meter
متوفر
UT221 True RMS Digital Clamp Meter 2000A (AC/DC)
متوفر
UT285C Three Phase Power Quality Analyzer
مش متوفر
UNI-T UT261A Phase Sequence and Motor Rotation Indicators
متوفر
UT273 Clamp Earth Ground Tester (Discontinued)
متوفر
UT278A Clamp Earth Ground Testers (Discontinued)
متوفر
UNI-T UT302D+ Infrared Thermometer with Dual Laser
متوفر
UNI-T UT330B Humidity / Temperature Datalogger
متوفر
UT332 Temperature Humidity Meters (Discontinued)
متوفر
UNI-T UT333-BT Mini Temperature Humidity Meter
متوفر
UNI-T UT363S Digital Anemometer (Wind Speed Meter)
متوفر
UT315A Vibration Tester جهاز قياس الاهتزازات
متوفر
UNI-T UT366A Digital Manometer
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.