Aspire Board: Dual-Channel Motor Control Development Board
2.500,00 EGP Original price was: 2.500,00 EGP.2.000,00 EGPCurrent price is: 2.000,00 EGP.
Board dimensions PCB: 74 × 66.5 mm Overall assembly: 74 × 66.5 × 17.3 mm (L × W × H) Dimensions measured from the supplied 3D model, including components in the overall assembly. Aspire Board by NileDynamics combines an STM32 microcontroller, two independent H-bridge DC motor drivers, current sensing and sensor I/O on one development board. Control two brushed DC motors, connect compatible sensors, and develop your robot application with Aspire Studio for Windows. Key features ARM Cortex-M3 microcontroller at 72 MHz, with 64 KB flash and 20 KB SRAM. Two full H-bridge motor outputs using four BTS7960B half-bridge devices, two per channel. Four synchronous PWM signals from TIM4 for bidirectional speed control. Independent analog current feedback for each motor and motor-supply voltage monitoring. Two single-channel encoder inputs, one per motor. USB-C connection with USB 2.0 full-speed device support, DFU bootloader and virtual COM port for telemetry. 13 digital I/O and 7 analog inputs listed in the datasheet; alternate functions share pins with board features. SWD debugging and access to timer, SPI, I2C and USART peripherals, subject to pin conflicts. Recommended operating conditions Parameter Recommended value Motor supply 24 V DC Continuous current per channel, no heatsink 5 A Continuous current per channel, with a heatsink (passive cooling) 10 A PWM frequency 8 kHz The 10 A continuous rating per channel requires a suitable heatsink with passive cooling. Verify thermal performance in the intended enclosure. Applications Differential-drive robotics, educational motion-control platforms, actuator and conveyor control, pump and fan drives, automated test fixtures, motor characterization and rapid prototyping. Integration notes Encoder inputs are single-channel, not A/B quadrature pairs. Direction cannot be measured from the encoder signal alone. TIM4 is reserved for motor PWM. ADC1 is shared with current and supply monitoring. A5 is the Motor B current-sense connection, not a spare analog input. Do not drive it with another signal. The 3.3 V and 5 V header rails are regulator outputs. Absolute maximum limits Datasheet stress limits: 30 V motor supply; 8 A per channel without a heatsink or 20 A per channel with thermal management; 20 kHz PWM. These are not recommended operating ratings. Operation at these limits is not guaranteed and may damage the board. Specifications based on Aspire Board Datasheet, Rev. 1.1, October 2026. Not authorized for use as a critical component in life-support devices or systems. Frequently asked questions Can Aspire control two DC motors and read sensors? Yes. Aspire Board provides two independent bidirectional brushed DC motor channels, current feedback and connections for compatible external sensors. The datasheet lists 13 digital I/O and 7 analog inputs, with SPI, I2C and USART available subject to shared pins. Check the pin map when combining sensors with motor control, because some pins are reserved for board functions. How do I check motor and sensor compatibility? Compare your motors’ rated voltage, running current and startup or stall current with the board’s recommended operating conditions and cooling requirements above. Check each sensor’s supply voltage, signal levels, interface and available pin assignments using the datasheet and pin map. Each motor has one single-channel encoder input for speed feedback, not an A/B quadrature pair. Absolute maximum ratings are stress limits, not operating targets. How do I get started with Aspire Studio? Install Aspire Studio on a Windows computer and follow the Aspire Board getting-started guide. Start with one motor, a USB data connection and a motor-appropriate external power supply. Use the motor tools to test motion without writing code, then configure, build and upload your application firmware. Sensor-based robot behavior requires compatible wiring and application code.
| Weight | 0,00 kg |
|---|---|
| Dimensions | 0,00 × 0,00 × 0,00 cm |
الآراء
Clear filtersلسه مفيش تقييمات.
منتجات مشابهة
ESP32-C3 Super Mini Development Board with 4MB Flash
متوفر
Luckfox Pico Mini B RV1103 Linux Micro Development Board
متوفر
Raspberry Pi 5-27W USB-C Power Supply مزود طاقة USB-C بقدرة 27 وات لبورد
متوفر
Raspberry Pi AI HAT+ 26 TOPS
متوفر
Raspberry Pi Camera Module V2 Official 8 MP HD IMX219 – Official
متوفر
Case for Arduino UNO R3 (mdf)
متوفر
Arduino Project Complete Starter Kit with Tutorial (63 Items).
متوفر
Arduino 46in 1 Sensor Modules Kit for CD
متوفر
Arduino Sensor & Modules Kit 15 Sensors
متوفر
ESP8266-12E v3 WIfi Development Kit
متوفر
10PCS Automatic Irrigation Kit Self Watering System
متوفر
Ethernet Shield W5100
متوفر
ESP32 Development Board (30PIN) Type-C (WIFI and Bluetooth) CP2102
متوفر
ESP32 Module With 2.4″ TFT Touch Screen Display WiFi + Bluetooth
متوفر
ESP32-32E Module With 2.8″ TFT Touch Screen Display WiFi + Bluetooth
متوفر
Raspberry Pi 5 Camera Cable 300mm
متوفر
Raspberry Pi 4 Model B 4GB RAM -Made in UK
متوفر
Raspberry Pi 4 Model B -8GB RAM -Made in UK
متوفر
Raspberry Pi 5 Model B – 8GB RAM – Made in UK
متوفر
Raspberry Pi Camera Board V1.3 (5MP, 1080p)
متوفر
STM32F103C8T6 32-Bit ARM Development Board (The Blue Pill)
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.