UT3025C Digital Storage Oscilloscope 25MHz
27.101,00 EGP
أوسيلوسكوب UT3025C من UNI-T هو أوسيلوسكوب مكتبي بقناتين و25 ميجاهرتز، بمعدل عينات 250 ميجا عينة/ثانية وشاشة LCD 7 بوصة، للشغل الإلكتروني العام. | The UT3025C oscilloscope is a UNI-T 2-channel 25MHz benchtop DSO with 250MS/s sampling and a 7-inch LCD for general electronics work.
UT3025C Digital Oscilloscope
The UT3025C oscilloscope is a UNI-T 2-channel benchtop digital storage scope with 25MHz bandwidth and 250MS/s real-time sampling, suited to general-purpose electronics work and training rather than high-frequency diagnostics.
UT3025C oscilloscope – How It Works
With a 25kpts memory depth per channel and a waveform capture rate of at least 2,000 frames per second, the scope balances a workable capture window with a reasonable chance of catching brief, non-repeating signal events. Vertical sensitivity from 1mV/div to 20V/div and a timebase from 10ns/div to 50s/div cover most general bench measurements on one instrument, from small analog signals to slower, longer-duration events.
Its 7-inch, 320×240 color LCD is large enough for comfortable viewing of both channels at once, and standard edge, pulse, video, and alternate trigger modes cover the everyday triggering needs of general repair and educational bench work.
Key Features
- 2 channels, 25MHz bandwidth, 250MS/s sample rate, 25kpts memory
- 7-inch color LCD, 320×240 resolution
- Waveform capture rate of at least 2,000 wfms/s
- Edge, pulse, video, and alternate trigger modes
Typical Applications
- General electronics repair and troubleshooting
- Electronics education and training labs
- Basic analog and digital signal verification
Specifications
- Bandwidth: 25MHz, 2 channels
- Sample rate: 250MS/s, memory depth 25kpts per channel
- Vertical sensitivity: 1mV/div-20V/div; Timebase: 10ns/div-50s/div
- Display: 7-inch color LCD, 320×240
Setup and Probe Notes
Compensate the probes before any serious measurement session, because an uncompensated probe distorts square-wave edges enough to make a healthy signal look like a fault. Most scopes include a built-in calibration output for exactly this purpose, and the adjustment takes less than a minute with a small trimmer tool.
Match the probe attenuation setting on the scope to the physical switch on the probe itself, since a mismatch silently multiplies or divides every voltage reading by ten. Keep ground leads as short as practical when looking at fast edges, because a long ground loop adds ringing and overshoot that belong to the measurement setup rather than the circuit under test.
For more background, see oscilloscope technology: reference. Browse our full range of UNI-T measuring instruments.
UT3025C Digital Oscilloscope
ده أوسيلوسكوب UT3025C من UNI-T، أوسيلوسكوب رقمي مكتبي بقناتين وباندويدث 25 ميجاهرتز ومعدل عينات حقيقي 250 ميجا عينة/ثانية، مناسب للشغل الإلكتروني العام والتدريب مش التشخيصات عالية التردد.
UT3025C oscilloscope – إزاي شغالة
بعمق ذاكرة 25 ألف نقطة لكل قناة ومعدل التقاط موجة 2000 فريم في الثانية على الأقل، الجهاز بيوازن بين نافذة التقاط عملية وفرصة معقولة لالتقاط أحداث إشارة قصيرة وغير متكررة. الحساسية الرأسية من 1 ملي فولت/قسمة لغاية 20 فولت/قسمة، والمحور الزمني من 10 نانو ثانية/قسمة لغاية 50 ثانية/قسمة، بيغطوا معظم القياسات المكتبية العامة بجهاز واحد، من إشارات تناظرية صغيرة لأحداث أبطأ وأطول مدة.
شاشته LCD الملونة 7 بوصة بدقة 320×240 كبيرة كفاية للمشاهدة المريحة للقناتين في نفس الوقت، وأوضاع تريجر حافة، نبضة، فيديو، وبديل القياسية بتغطي احتياجات التريجر اليومية لشغل الصيانة والتعليم العام.
المواصفات الأساسية
- قناتين، باندويدث 25 ميجاهرتز، معدل عينات 250 ميجا عينة/ثانية، ذاكرة 25 ألف نقطة
- شاشة LCD ملونة 7 بوصة، دقة 320×240
- معدل التقاط موجة 2000 فريم/ثانية على الأقل
- أوضاع تريجر: حافة، نبضة، فيديو، وبديل
الاستخدامات
- صيانة وإصلاح إلكتروني عام
- معامل تدريب وتعليم إلكتروني
- فحص أساسي لإشارات تناظرية ورقمية
المواصفات الفنية
- الباندويدث: 25 ميجاهرتز، قناتين
- معدل العينات: 250 ميجا عينة/ثانية، عمق الذاكرة 25 ألف نقطة لكل قناة
- الحساسية الرأسية: 1 ملي فولت-20 فولت/قسمة؛ المحور الزمني: 10 نانو ثانية-50 ثانية/قسمة
- الشاشة: LCD ملونة 7 بوصة، 320×240
ملاحظات الإعداد والمساييب
اعمل معايرة للمساييب قبل أي جلسة قياس جدية، لأن مسبار غير معاير بيشوه حواف الموجة المربعة لدرجة تخلي إشارة سليمة تبان كأنها عطل. أغلب الأجهزة فيها خرج معايرة مدمج للغرض ده بالظبط، والضبط بياخد أقل من دقيقة بمفك صغير.
طابق إعداد تخفيف المسبار في الجهاز مع المفتاح الفيزيائي على المسبار نفسه، لأن عدم التطابق بيضرب أو يقسم كل قراءة فولت على عشرة من غير ما تحس. خلي أسلاك الأرضي قصيرة قد الإمكان وانت بتشوف حواف سريعة، لأن حلقة أرضي طويلة بتضيف رنين وتجاوز تابعين لإعداد القياس مش للدائرة اللي بتختبرها.
لمزيد من التفاصيل التقنية راجع تقنية الأوسيلوسكوب على ويكيبيديا، وتصفح باقي أجهزة قياس UNI-T المتوفرة عندنا.
منتجات مشابهة
UNI-T UT123D Smart Digital Multimeter
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.