UNI-T UT-L35 Group Test Leads

2.018,00 EGP

أسلاك اختبار UT-L35 طقم أسلاك بعيدة المدى من 5 قطع من UNI-T مبني لأجهزة عزل UT513/UT513A، بيمتد من كابل 1.6 متر لحد 20 متر. | The UT-L35 test leads are a 5-piece long-range lead set from UNI-T built for the UT513/UT513A insulation testers, spanning cable lengths from 1.6m up to 20m.

Description

UNI-T UT-L35 Group Test Leads

The UT-L35 test leads are a 5-piece long-range lead set from UNI-T built for the UT513/UT513A insulation testers, spanning cable lengths from 1.6m up to 20m.

UT-L35 test leads – How It Works

The set pairs a short 1.6m red+green lead for close-range testing with dedicated 5m, 10m, and 20m single leads, letting you reach a distant earth stake or remote test point during an insulation or earth-resistance test without needing an extension cable spliced on. Total assembled length runs to roughly 1500mm on the standard configuration, with CAT III 1000V / CAT IV 600V 10A safety-rated, UL-certified double insulation throughout.

Purpose-built for the UT513 and UT513A megger testers rather than general multimeter use, it’s the right accessory when a standard-length lead simply can’t reach the ground rod or equipment under test.

Key Features

  • 5-piece set: 1.6m pair + 5m, 10m, 20m single leads
  • Built for UT513 / UT513A insulation testers
  • CAT III 1000V / CAT IV 600V 10A rating
  • UL-certified double insulation

Typical Applications

  • Long-distance earth resistance and insulation testing
  • Reaching remote ground stakes without extension splicing
  • UT513/UT513A megger tester accessory replacement

Specifications

  • Set: 1.6m pair, 5m, 10m, 20m leads
  • Compatibility: UT513, UT513A
  • Safety: CAT III 1000V / CAT IV 600V, 10A
  • Insulation: UL-certified, double

Safe Testing Practice

Always confirm the circuit is fully de-energized and isolated before applying a test voltage, because insulation testers deliberately output high voltage and connecting one to a live circuit is dangerous to both the operator and the instrument. Discharge the tested equipment afterwards, since cables and windings can hold a charge long enough to deliver a shock minutes later.

Disconnect sensitive electronics from the circuit before testing, as the applied test voltage can damage semiconductors and surge protection devices that were never designed to see it. Record readings alongside ambient temperature and humidity, because insulation resistance varies significantly with both and a trend over time tells far more than a single absolute number.

Reference: insulation resistance testing — browse our full range of UNI-T measuring instruments.


UNI-T UT-L35 Group Test Leads

أسلاك اختبار UT-L35 طقم أسلاك بعيدة المدى من 5 قطع من UNI-T مبني لأجهزة عزل UT513/UT513A، بيمتد من كابل 1.6 متر لحد 20 متر.

UT-L35 test leads – إزاي شغالة

الطقم بيجمع سلك قصير 1.6 متر أحمر+أخضر للاختبار قريب المدى مع أسلاك مفردة مخصصة 5 و10 و20 متر، يخليك توصل لسيخ أرضي بعيد أو نقطة اختبار نائية أثناء اختبار عزل أو مقاومة أرضي من غير ما تحتاج كابل تمديد موصّل. الطول الإجمالي المجمّع بيوصل لحوالي 1500 مم في التكوين القياسي، بتصنيف سلامة CAT III 1000V / CAT IV 600V 10 أمبير وعزل مزدوج معتمد UL.

مبني خصيصًا لأجهزة UT513 وUT513A مش للاستخدام العام مع الملتيميتر، الأكسسوار الصح لما سلك بطول قياسي ببساطة مبيوصلش لسيخ الأرضي أو المعدة تحت الاختبار.

المواصفات الأساسية

  • طقم 5 قطع: زوج 1.6 متر + أسلاك مفردة 5 و10 و20 متر
  • مبني لأجهزة عزل UT513 / UT513A
  • تصنيف CAT III 1000V / CAT IV 600V 10 أمبير
  • عزل مزدوج معتمد UL

الاستخدامات

  • اختبار مقاومة أرضي وعزل لمسافات طويلة
  • الوصول لسيخ أرضي بعيد من غير توصيل تمديد
  • استبدال أكسسوار جهاز UT513/UT513A

المواصفات الفنية

  • الطقم: زوج 1.6 متر، سلك 5 و10 و20 متر
  • التوافق: UT513، UT513A
  • السلامة: CAT III 1000V / CAT IV 600V، 10 أمبير
  • العزل: معتمد UL، مزدوج

ممارسات اختبار آمنة

دايمًا اتأكد إن الدائرة مفصولة ومعزولة تمامًا قبل ما تطبق فولت اختبار، لأن أجهزة اختبار العزل بتطلع فولت عالي عن قصد وتوصيلها بدائرة حية خطر على المشغل والجهاز. فرّغ المعدة المختبرة بعد الاختبار، لأن الكابلات والملفات ممكن تحتفظ بشحنة كافية تدي صدمة بعد دقايق.

افصل الإلكترونيات الحساسة من الدائرة قبل الاختبار، لأن فولت الاختبار المطبق ممكن يضر أشباه الموصلات وأجهزة الحماية من التيار العالي اللي ماتصممتش تشوفه. سجل القراءات مع حرارة ورطوبة الجو، لأن مقاومة العزل بتتغير كتير مع الاتنين والاتجاه مع الوقت بيقول أكتر بكتير من رقم مطلق واحد.

لمزيد من التفاصيل التقنية راجع اختبار مقاومة العزل على ويكيبيديا، وتصفح باقي أجهزة قياس UNI-T المتوفرة عندنا.

Shipping & Delivery
Reviews (0)
0 reviews
0
0
0
0
0

الآراء

Clear filters

لسه مفيش تقييمات.

كن أول من يقيم “UNI-T UT-L35 Group Test Leads”

بريدك الإلكتروني مش هيتنشر. الخانات المطلوبة معلّمة بـ *

لازم تكون مسجل دخول عشان تقدر تضيف صور لمراجعتك.