Network Resistor 47ohm – 6 Pin
5,00 EGP
شبكة SIP منخفضة القيمة، الوحدة دي بـ6 أطراف بتجمع خمس مقاومات 47 أوم لمجموعات LED أو انحياز عالية التيار. | A low-value SIP network, this 6-pin module packs five 47 ohm resistors for higher-current LED or biasing groups.
47 ohm 6 pin network resistor
The 47 ohm 6 pin network resistor is a single in-line package (SIP) resistor array with five separate 47Ω elements sharing a common rail, a low-value entry in this network-resistor family suited to higher-current applications.
How It Works
With 6 pins, one pin typically serves as the common bus while the remaining five connect to individual 47Ω resistive elements on a shared ceramic substrate. At this low resistance, the network handles noticeably more current per line than the kilohm-range networks in this catalog, useful for LED current limiting or low-impedance biasing.
Key Features
- Resistance: 47Ω per element
- Package: 6-pin SIP (single in-line)
- Five resistors sharing one common pin
- Through-hole mounting for easy PCB assembly
- Reduces component count and board space
Typical Applications
- Higher-current LED current-limiting arrays
- Low-impedance biasing networks
- Five-line signal termination
Specifications
Resistance: 47Ω per element | Package: 6-pin SIP | Configuration: bussed (common pin) | Mounting: through-hole
47Ω is a common low-value resistor used where higher current flow is expected, distinct from the kilohm-range pull-up networks common elsewhere in this catalog.
Reference: DigiKey resistor networks & arrays category | More Resistors & Potentiometers
47 ohm 6 pin network resistor
شبكة مقاومات 47 ohm 6 pin network resistor عبارة عن حزمة أحادية الخط (SIP) بخمس عناصر منفصلة 47 أوم بتشارك خط مشترك، إدخال منخفض القيمة في عائلة شبكة المقاومات دي مناسب لتطبيقات عالية التيار.
إزاي شغالة
بـ6 أطراف، طرف واحد بيخدم عادة كباص مشترك بينما الخمس أطراف الباقية بتتوصل بعناصر مقاومة 47 أوم فردية على قاعدة سيراميك مشتركة. عند المقاومة المنخفضة دي، الشبكة بتتحمل تيار أعلى بوضوح لكل خط من شبكات الكيلو أوم في هذا الكتالوج، مفيدة لتحديد تيار LED أو انحياز منخفض الممانعة.
المواصفات الأساسية
- المقاومة: 47 أوم لكل عنصر
- العبوة: SIP بـ6 أطراف (خط أحادي)
- خمس مقاومات بتشارك طرف مشترك واحد
- تركيب بأطراف للثقب لسهولة التجميع على اللوحة
- بتقلل عدد المكونات ومساحة اللوحة
الاستخدامات
- مصفوفات تحديد تيار LED عالية التيار
- شبكات انحياز منخفضة الممانعة
- إنهاء إشارة خمس خطوط
المواصفات الفنية
المقاومة: 47 أوم لكل عنصر | العبوة: SIP بـ6 أطراف | التكوين: موصل (طرف مشترك) | التركيب: أطراف للثقب
47 أوم مقاومة منخفضة القيمة شائعة بتتاستخدم حيث متوقع تدفق تيار أعلى، مختلفة عن شبكات السحب لأعلى بمستوى الكيلو أوم الشائعة في مكان تاني بهذا الكتالوج.
| Weight | 0,00 kg |
|---|---|
| Dimensions | 0,00 × 0,00 × 0,00 cm |
الآراء
Clear filtersلسه مفيش تقييمات.
منتجات مشابهة
RC-33 Magnetic Reed Switch Door Sensor Normally Open
مش متوفر
74155 IC Dual 2-to-4 Line Decoders/Demultiplexers DIP-16
متوفر
FZH145 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
FZH175 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
Z8420APS ZILOG Z80 IC PIO PARALLEL INPUT/OUTPUT CONTROLLER DIP40
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.