Holder for PIR Motion Sensor Detector Module HC-SR501 Case

30,00 EGP

حامل حساس PIR HC-SR501 علبة تركيب بفتحتين برغي بتتثبت على قبة الحساس لتركيب مرتب. | The HC-SR501 PIR Sensor Holder is a mounting case with two screw holes that clips onto the sensor’s dome for a clean install.

Description

Holder for HC-SR501 PIR Motion Sensor

The HC-SR501 PIR Sensor Holder is a small mounting bracket designed specifically to hold the popular HC-SR501 PIR motion sensor module securely to a wall, panel or enclosure without any glue or improvised mounting.

HC-SR501 Holder – How It Works

The bracket clips around the sensor’s characteristic round Fresnel-lens dome and body, holding the module firmly in place while leaving the lens and the onboard sensitivity/delay-time trimmer potentiometers fully accessible for adjustment after installation. It uses two screw holes on the module side to secure the sensor to the bracket, plus a second pair of holes for mounting the bracket itself onto a wall, project box or enclosure panel, giving a clean, professional-looking finish compared to hot glue or tape. Because it is sized specifically for the HC-SR501’s dimensions, the fit is snug and the sensor’s dome stays properly aligned, which matters for the sensor’s detection cone and effective range.

Key Features

  • Purpose-built for the HC-SR501 PIR module
  • Two-part bracket: sensor clip + wall mount
  • Leaves lens and trimmer pots accessible
  • Screw-mount installation, no glue needed

Typical Applications

  • Wall or ceiling mounting for motion-activated lighting
  • Security and alarm project enclosures
  • Clean-finish DIY motion sensor installs

Specifications

  • Compatibility: HC-SR501 PIR sensor module
  • Mounting: two-hole screw fixation
  • Material: molded plastic bracket

Specifications are sourced from seller documentation for the HC-SR501 PIR motion sensor mounting bracket. Since the holder is sized for the standard HC-SR501 dome, double-check it against other PIR sensor variants with a different lens diameter before ordering. Installation takes only a few minutes with a small screwdriver, and the bracket’s open design keeps airflow around the sensor body unobstructed, which helps the PIR element respond consistently to temperature changes in its detection zone.

Looking for more sensors? Browse our full range of sensors and modules.


حامل لحساس الحركة PIR HC-SR501

حامل حساس PIR HC-SR501 حامل تركيب صغير مصمم خصيصًا لتثبيت موديول حساس الحركة PIR الشهير HC-SR501 بإحكام على حائط أو لوحة أو علبة من غير أي غراء أو تركيب مرتجل.

حامل HC-SR501 – إزاي شغال

الحامل بيلف حول قبة عدسة فريسنل المستديرة المميزة للحساس وجسمه، وبيمسك الموديول بثبات في مكانه مع ترك العدسة وبوتنشيوميترات ضبط الحساسية ووقت التأخير المدمجة متاحة بالكامل للضبط بعد التركيب. بيستخدم فتحتين برغي على جانب الموديول لتثبيت الحساس بالحامل، بالإضافة لزوج تاني من الفتحات لتركيب الحامل نفسه على حائط أو صندوق مشروع أو لوحة علبة، وده بيدي لمسة نهائية نظيفة واحترافية مقارنة بالغراء الساخن أو الشريط اللاصق. وبما إنه مقاس خصيصًا لأبعاد HC-SR501، التركيب بيبقى محكم وقبة الحساس بتفضل محاذية صح، وده مهم لمخروط الكشف الخاص بالحساس ومداه الفعلي.

المواصفات الأساسية

  • متوافق خصيصًا مع موديول حساس PIR من نوع HC-SR501
  • حامل من جزئين: مشبك الحساس + تركيب الحائط
  • بيسيب العدسة وبوتنشيوميترات الضبط متاحة
  • تركيب ببرغي، من غير حاجة لغراء

الاستخدامات

  • تركيب على حائط أو سقف لإضاءة تعمل بالحركة
  • علب مشاريع الأمان والإنذار
  • تركيبات حساس حركة DIY بلمسة نظيفة

المواصفات الفنية

  • التوافق: موديول حساس PIR من نوع HC-SR501
  • التركيب: تثبيت ببرغي بفتحتين
  • الخامة: حامل بلاستيك مصبوب

المواصفات مأخوذة من توثيق بائع لـحامل تركيب حساس حركة PIR من نوع HC-SR501. وبما إن الحامل مقاس لقبة HC-SR501 القياسية، تأكد منه مقابل نسخ حساس PIR تانية بقطر عدسة مختلف قبل الطلب.

محتاج حساسات تانية؟ تصفح باقي الحساسات والموديولات عندنا.

Shipping & Delivery
Reviews (0)
0 reviews
0
0
0
0
0

الآراء

Clear filters

لسه مفيش تقييمات.

كن أول من يقيم “Holder for PIR Motion Sensor Detector Module HC-SR501 Case”

بريدك الإلكتروني مش هيتنشر. الخانات المطلوبة معلّمة بـ *

لازم تكون مسجل دخول عشان تقدر تضيف صور لمراجعتك.