74240 SMD LOGIC GATE
30,25 EGP
دائرة SN74240 (تغليفة SMD) نسخة سطحية من البافر/درايفر خط 8 قنوات ثلاثي الحالة العاكس — مطابقة وظيفيًا لنسخة DIP. | 74240 smd logic gate — The SN74240 (SMD package) is the surface-mount version of the octal 3-state inverting buffer/line driver — functionally identical to the DIP version.
SN74240 SMD Octal Inverting Buffer/Line Driver
The SN74240 (SMD package) is the surface-mount version of the octal 3-state inverting buffer/line driver — functionally identical to the DIP version.
74240 – How It Works
Same internal logic as the through-hole 74240: 8 channels of 3-state, inverting buffering split into two independently-enabled 4-bit groups — just in a smaller footprint suited to automated SMD assembly.
Choose this SMD variant specifically for automated pick-and-place assembly or when board space is at a premium, otherwise it behaves identically to the DIP version.
Key Features
- 8-channel buffer/line driver
- 3-state, inverting outputs
- Compact SMD package for automated assembly
Typical Applications
- Bus signal buffering on compact PCBs
- Circuit isolation
- Driving multiple loads from a single signal source
Datasheet Specifications
- Supply Voltage: 4.5V – 5.5V
- Logic Family: TTL
- Package: SOIC (SMD)
For more background, see tri-state buffer logic: reference. Browse our full range of ICs and microcontrollers.
Its 20-pin SOIC footprint is a standard, widely-stocked package that most PCB manufacturers can place without special handling.
SN74240 SMD Octal Inverting Buffer/Line Driver
دائرة SN74240 (تغليفة SMD) نسخة سطحية من البافر/درايفر خط 8 قنوات ثلاثي الحالة العاكس — مطابقة وظيفيًا لنسخة DIP.
74240 – إزاي شغالة
نفس المنطق الداخلي زي 74240 القابلة للحام اليدوي: 8 قنوات بافر ثلاثي الحالة وعاكس مقسمة لمجموعتين مستقلتين بـ4 بت — بس في مساحة أصغر مناسبة للتجميع الآلي SMD.
اختار نسخة SMD دي بالتحديد للتجميع الآلي أو لما مساحة البورد محدودة، غير كده بتتصرف بنفس طريقة نسخة DIP تمامًا.
المواصفات الأساسية
- بافر/درايفر بـ8 قنوات
- مخارج ثلاثية الحالة وعاكسة
- تغليفة SMD مدمجة للتجميع الآلي
الاستخدامات
- تقوية إشارات الباص على بوردات مدمجة
- عزل الدوائر
- تشغيل عدة أحمال من مصدر إشارة واحد
المواصفات الفنية
- جهد التغذية: 4.5 – 5.5 فولت
- عائلة المنطق: TTL
- التغليف: SOIC (SMD)
لمزيد من التفاصيل التقنية راجع مخارج الحالة الثلاثية على ويكيبيديا، وتصفح باقي الدوائر المتكاملة والمتحكمات المتوفرة عندنا.
تغليفتها SOIC بـ20 رجل شكل قياسي ومتوفر بكثرة تقدر معظم مصانع البورد تجمعه من غير معاملة خاصة.
منتجات مشابهة
7432 Quad 2-Input OR Gate
متوفر
7474 D-type Flip Flop Counter or Delay Flip-flop
متوفر
74151 Multiplexer
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.