Nickel Strip 0.1x4mm for 18650 Lithium Battery 1 meter

Nickel Strip 0.1x4mm for 18650 Lithium Battery 1 meter

This Nickel Strip 0.1x4mm for 18650 Lithium Battery 1 meter is a pure nickel strip made for spot-welding 18650 lithium battery cells into a pack. It gives a low-resistance, solderable connection between cells without needing heat that could damage the cell. As a result, it is a standard material for building DIY power banks, e-bike battery packs, flashlight packs and other multi-cell lithium battery assemblies.

Because the thickness and width are clearly stated in the product name, you can match this strip to your spot welder and pack design with confidence, instead of guessing from a photo alone. A thinner, narrower strip suits lower-current packs, while a thicker or wider strip carries more current for higher-drain packs such as power tools or e-bikes.

Key Features

• Type: Nickel Strip for 18650 lithium battery packs
• Thickness: 0.1mm
• Width: 4mm
• Length: 1 meter per roll
• Condition: New, checked for basic quality before shipping

Applications

You can use this in several battery pack builds. For example:

• DIY 18650 power bank assembly
• E-bike and e-scooter battery pack building
• Flashlight and torch battery pack repair
• Spot-welding workshops and battery rebuild services

Handling & Safety

Always use a proper spot welder rather than a soldering iron directly on the cell terminals, since prolonged heat can damage a lithium cell. Match the nickel strip thickness to your welder’s power setting, and wear eye protection while welding. These steps protect your cells and keep your build safe.

Why Choose This Nickel Strip

First, it is a widely used material in DIY and professional battery pack assembly, so it fits into most spot-welding workflows easily. Second, the thickness and width are clearly specified, so you can match it to your welder and pack design with confidence. Third, our team checks basic quality before it ships. So, you avoid guesswork when you order. As a result, this is a dependable choice for a power bank, an e-bike pack or a repair job.

Usage Tips

Before welding a full pack, test your spot welder’s settings on a spare piece of nickel strip and a scrap cell terminal. Therefore, you avoid a weak weld or a burned cell on your real pack. Also, keep the strip clean and free of oxidation before welding, and cut only the length you need for each connection. As a result, your battery pack build stays reliable and safer to use.

Whether you are building a power bank, repairing a flashlight pack or assembling an e-bike battery, this nickel strip is checked before it ships so it welds cleanly from the first use.

Looking for more nickel strips and spot-welding accessories? Browse our full range of nickel strips & welding accessories for your next battery pack build.

Nickel Strip 0.1x4mm for 18650 Lithium Battery 1 meter

Nickel Strip 0.1x4mm for 18650 Lithium Battery 1 meter شريط نيكل نقي مخصص للحام بالنقاط (Spot Welding) لخلايا بطارية 18650 وتجميعها في باك واحد. بيوفر توصيلة منخفضة المقاومة بين الخلايا من غير الحاجة لحرارة ممكن تضر الخلية. عشان كده بيستخدم بشكل أساسي في تجميع باور بانك، باك بطاريات دراجات كهربائية، وباك بطاريات الكشافات وغيرها.

المميزات

• النوع: شريط نيكل لبطاريات 18650
• السُمك: 0.1mm
• العرض: 4mm
• الطول: 1 متر للفة الواحدة
• الحالة: جديد، تم فحص الجودة الأساسية قبل الشحن

الاستخدامات

• تجميع باور بانك DIY من خلايا 18650
• تجميع باك بطاريات الدراجات الكهربائية
• إصلاح باك بطاريات الكشافات
• ورش اللحام بالنقاط وإعادة تأهيل البطاريات

ملاحظات الأمان

استخدم دايمًا ماكينة لحام بالنقاط بدل الكاوية العادية على أطراف الخلية، لأن الحرارة المستمرة ممكن تضر الخلية. طابق سُمك شريط نيكل مع إعدادات قوة الماكينة، والبس نضارة حماية أثناء اللحام. الخطوات دي بتحمي الخلايا وتخلي شغلك آمن.

تقدر تستعرض باقي شرائط النيكل وإكسسوارات اللحام بالنقاط عندنا لمشروع بطاريتك القادم.