Network Resistor 100kohm – 8 Pin
6,05 EGP
مرجع القطعة 82-104، المصفوفة المعزولة دي بـ4 عناصر بتجمع أربع مقاومات 100 كيلو أوم مستقلة تمامًا بدون خط مشترك. | Part reference 82-104, this isolated 4-array packs four fully independent 100K ohm resistors with no shared common rail.
100k ohm 8 pin isolated network resistor
The 100k ohm 8 pin isolated network resistor (part reference 82-104) is a single in-line package (SIP) resistor array with four fully independent 100KΩ elements, each using its own pair of pins with no shared common rail.
How It Works
Unlike bussed networks that dedicate one pin to a common rail, this isolated 4-array configuration gives each of its four 100KΩ resistors two dedicated pins (8 pins total), so each resistor connects into a completely separate part of the circuit — useful whenever the resistors must not share a node.
Key Features
- Resistance: 100KΩ per element
- Package: 8-pin SIP (single in-line)
- Four fully isolated, independent resistors
- Through-hole mounting for easy PCB assembly
- No shared common pin, unlike bussed arrays
Typical Applications
- Independent current-sensing or snubber positions
- Circuits where resistors must not share a node
- Compact multi-channel signal conditioning
Specifications
Resistance: 100KΩ per element | Package: 8-pin SIP | Configuration: isolated (4-array, no common pin) | Part number: 82-104
Isolated networks like this one are the right choice whenever bussed (common-pin) arrays would improperly tie unrelated circuit nodes together.
Reference: DigiKey resistor networks & arrays category | More Resistors & Potentiometers
100k ohm 8 pin isolated network resistor
شبكة مقاومات 100k ohm 8 pin isolated network resistor (مرجع القطعة 82-104) عبارة عن حزمة أحادية الخط (SIP) بأربع عناصر مستقلة تمامًا 100 كيلو أوم، كل واحدة بتستخدم زوج أطراف خاص بيها بدون خط مشترك.
إزاي شغالة
على عكس الشبكات الموصلة اللي بتخصص طرف واحد لخط مشترك، التكوين المعزول بـ4 مصفوفات ده بيدي كل واحدة من مقاوماته الأربع 100 كيلو أوم طرفين مخصصين (8 أطراف إجمالًا)، فكل مقاومة بتتوصل بجزء منفصل تمامًا من الدائرة — مفيد كل ما المقاومات لازم متشاركش عقدة.
المواصفات الأساسية
- المقاومة: 100 كيلو أوم لكل عنصر
- العبوة: SIP بـ8 أطراف (خط أحادي)
- أربع مقاومات معزولة ومستقلة تمامًا
- تركيب بأطراف للثقب لسهولة التجميع على اللوحة
- بدون طرف مشترك، على عكس المصفوفات الموصلة
الاستخدامات
- مواضع استشعار تيار مستقلة أو كبح
- دوائر المقاومات فيها لازم متشاركش عقدة
- تكييف إشارة متعدد القنوات مدمج
المواصفات الفنية
المقاومة: 100 كيلو أوم لكل عنصر | العبوة: SIP بـ8 أطراف | التكوين: معزول (4 مصفوفات، بدون طرف مشترك) | رقم القطعة: 82-104
الشبكات المعزولة زي دي هي الاختيار الصح كل ما المصفوفات الموصلة (طرف مشترك) هتربط عقد دائرة مش مرتبطة ببعض بشكل خاطئ.
منتجات مشابهة
RC-33 Magnetic Reed Switch Door Sensor Normally Open
مش متوفر
FZH145 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
FZH175 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
Z8420APS ZILOG Z80 IC PIO PARALLEL INPUT/OUTPUT CONTROLLER DIP40
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.