PVC Heat Shrink Tube For 18650 Lithium Battery 1PC

PVC Heat Shrink Tube For 18650 Lithium Battery 1PC

Meet the PVC Heat Shrink Tube. This is a durable PVC heat shrink sleeve made for 18650 lithium battery 1pc packs. It comes in a standard 1-meter length. People use it to insulate, protect and re-wrap battery cells. As a result, it gives a clean, safe, professional finish to any custom battery build.

This tube shrinks tightly around the battery pack once heated. Therefore, it forms a snug, secure layer of electrical insulation and moisture resistance. Additionally, it protects the cell from scratches and short circuits during handling. Consequently, your battery pack stays safer over its working life.

Key Features

Here are the core specs. For instance:

• Material: High-quality PVC
• Length: 1 Meter
• Shrinkage: Excellent horizontal shrinkage for a tight fit
• Function: Electrical insulation and physical protection

In addition, the material resists moisture and minor abrasion. So, it keeps working reliably in everyday handling and storage conditions.

Applications

You can use this heat shrink tube in several projects. For example:

• Re-wrapping and repairing damaged 18650 lithium battery 1pc skins
• Assembling custom battery packs for DIY electronics
• Insulating wire splices and connectors
• Safe storage and handling of individual lithium-ion cells

Because the sleeve is simple to apply with a heat gun or lighter, most makers finish the job in minutes.

How To Use

First, slide the tube over the 18650 lithium battery 1pc pack. Second, apply gentle, even heat with a heat gun. Third, keep moving the heat source so the shrink stays even. As a result, you get a tight, wrinkle-free finish. Also, avoid direct contact between the flame and the battery terminals. This step keeps the cell safe during the process. Finally, let the tube cool for a few seconds before handling. So, the finish sets properly and stays secure.

Why It Matters

A worn or damaged wrapper can expose bare battery cells. This raises the risk of short circuits and physical damage. Therefore, a fresh PVC sleeve restores safe insulation in minutes. In addition, it gives your battery pack a clean, professional look. Consequently, this small part makes a real difference in build quality and long-term safety.

Looking for more sizes? Browse our full range of battery accessories, chargers and modules for your DIY battery builds.

غلاف حراري PVC لـ بطاريات 18650

غلاف حراري PVC غلاف بلاستيك PVC حراري مخصص لتغليف بطاريات 18650. يُستخدم لعزل وحماية خلايا البطارية وإعادة تغليفها بشكل آمن. بعد التسخين، يعطي طبقة عزل كهربائي محكمة ومقاومة للرطوبة.

المميزات

• الخامة: PVC عالي الجودة
• الطول: متر واحد
• الانكماش: انكماش أفقي ممتاز لتثبيت محكم
• الوظيفة: عزل كهربائي وحماية فيزيائية

الاستخدامات

• إعادة تغليف الأغلفة التالفة للخلايا
• تجميع باتريات مخصصة لمشاريع DIY
• عزل توصيلات الأسلاك والموصلات
• تخزين ومناولة خلايا الليثيوم بأمان

طريقة الاستخدام

أولاً، ركّب الغلاف حول البطارية. ثانيًا، سخّنه بلطف باستخدام مسدس حراري. ثالثًا، حرّك مصدر الحرارة بالتساوي عشان الانكماش يبقى متساوي. بعد كده هتحصل على تغليف محكم من غير تجاعيد. تجنب ملامسة اللهب مباشرة لأطراف البطارية عشان تحافظ على سلامتها.

تقدر تستعرض باقي إكسسوارات وشواحن وموديولات البطاريات عندنا بمقاسات مختلفة لمشاريع البطاريات المخصصة.