Network Resistor 180ohm – 9 Pin
5,00 EGP
بحجم مناسب لباص 8 بت كامل، شبكة 180 أوم بـ9 أطراف دي بتوفر مقاومة تحديد تيار LED لكل خط بالإضافة لخط مشترك. | Sized for a full 8-bit bus, this 9-pin 180 ohm network provides one LED-limiting resistor per line plus a common rail.
180 ohm 9 pin network resistor
The 180 ohm 9 pin network resistor is a single in-line package (SIP) resistor array with eight separate 180Ω elements sharing a common rail, sized specifically to cover a full 8-bit LED display or data bus.
How It Works
With 9 pins, one pin serves as the common bus while the remaining eight connect to individual 180Ω resistive elements on a shared ceramic substrate, giving exactly one current-limiting resistor per LED or bit on an 8-line group in a single compact part.
Key Features
- Resistance: 180Ω per element
- Package: 9-pin SIP (single in-line)
- Eight resistors sharing one common pin
- Through-hole mounting for easy PCB assembly
- Reduces component count and board space
Typical Applications
- Full 8-LED display or bar graph current limiting
- 8-bit pull-up/pull-down resistor arrays
- Parallel data bus signal conditioning
Specifications
Resistance: 180Ω per element | Package: 9-pin SIP | Configuration: bussed (common pin) | Mounting: through-hole
180Ω sits between the 150Ω and 220Ω network values in this catalog, giving a slightly different LED brightness level than either neighbor.
Reference: DigiKey resistor networks & arrays category | More Resistors & Potentiometers
180 ohm 9 pin network resistor
شبكة مقاومات 180 ohm 9 pin network resistor عبارة عن حزمة أحادية الخط (SIP) بثمان عناصر منفصلة 180 أوم بتشارك خط مشترك، بحجم مخصص لتغطية شاشة LED أو باص بيانات 8 بت كامل.
إزاي شغالة
بـ9 أطراف، طرف واحد بيخدم كباص مشترك بينما الثمان أطراف الباقية بتتوصل بعناصر مقاومة 180 أوم فردية على قاعدة سيراميك مشتركة، بيديك بالظبط مقاومة تحديد تيار لكل LED أو بت على مجموعة 8 خطوط في قطعة مدمجة واحدة.
المواصفات الأساسية
- المقاومة: 180 أوم لكل عنصر
- العبوة: SIP بـ9 أطراف (خط أحادي)
- ثمان مقاومات بتشارك طرف مشترك واحد
- تركيب بأطراف للثقب لسهولة التجميع على اللوحة
- بتقلل عدد المكونات ومساحة اللوحة
الاستخدامات
- تحديد تيار شاشة أو شريط بياني 8 LED كامل
- مصفوفات سحب لأعلى/أسفل 8 بت
- تكييف إشارة باص البيانات المتوازي
المواصفات الفنية
المقاومة: 180 أوم لكل عنصر | العبوة: SIP بـ9 أطراف | التكوين: موصل (طرف مشترك) | التركيب: أطراف للثقب
180 أوم بتقع بين قيمتي شبكة 150 أوم و220 أوم في هذا الكتالوج، بتديك مستوى سطوع LED مختلف شوية عن أي من الجارتين.
| Weight | 0,00 kg |
|---|---|
| Dimensions | 0,00 × 0,00 × 0,00 cm |
الآراء
Clear filtersلسه مفيش تقييمات.
منتجات مشابهة
RC-33 Magnetic Reed Switch Door Sensor Normally Open
مش متوفر
74155 IC Dual 2-to-4 Line Decoders/Demultiplexers DIP-16
متوفر
FZH145 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
FZH175 Integrated Circuits (IC), Dual 6-Input Nand Gate
متوفر
Z8420APS ZILOG Z80 IC PIO PARALLEL INPUT/OUTPUT CONTROLLER DIP40
متوفر


الآراء
Clear filtersلسه مفيش تقييمات.