MotWick MT-2015 2mm x 1.5m Desoldering Wick

MotWick MT-2015 2mm x 1.5m Desoldering Wick

The MotWick MT-2015 2mm x 1.5m Desoldering Wick is a copper braid that removes solder. The label shows 2.0mm width, 1.5m length, and the text Quickly Remove Solder Residue. As a result, you can clean small pads and fine-pitch pins with control.

How the MotWick MT-2015 Desoldering Wick Works

First, you lay the braid across the solder joint. Second, you press a hot soldering iron on the braid. Then the braid draws the melted solder up into its strands. Because the braid is 2mm wide, it fits tight spaces between pins. Therefore, use it for small SMD pads and narrow joints.

Key Features

• 2mm width
• 1.5m length on a spool
• Quickly removes solder residue
• Suits fine work
• MotWick MT-2015 model

Typical Uses

• Cleaning small pads
• Removing bridges on IC pins
• Desoldering small components
• Phone and board repair

Specifications

• Brand: MotWick
• Model: MT-2015
• Width: 2mm
• Length: 1.5m
• Made in China per label

The photo shows the spool. Therefore, use flux for a faster result. Also, cut off the used section each time.

Ordering the MotWick MT-2015 2mm x 1.5m Desoldering Wick from Electrolik

Electrolik ships orders across Egypt, and you can pay cash on delivery. First, compare the photo with your need, because the picture shows what we sell. Second, read the specifications above and match them with your project. If you are unsure about the MotWick MT-2015 2mm x 1.5m Desoldering Wick, contact our team before you order. As a result, you avoid a wrong purchase and save time. In addition, we check each item before it leaves the shop. Therefore, you receive the product as pictured, and you can ask us any question after delivery.

Choosing the right part matters, so read the details with care. For example, check the size, the voltage, and the connector type against your device. Also, keep the original packaging for a simple exchange if something does not match. Because our team knows these parts, we answer questions fast on WhatsApp and by phone.

Looking for more options? Browse our full range of solder wire flux & wick at Electrolik.

MotWick MT-2015 2mm x 1.5m Desoldering Wick

الـ MotWick MT-2015 2mm x 1.5m فتيلة نحاس رفيعة لإزالة اللحام الدقيق. الملصق مكتوب عليه العرض 2 مم والطول 1.5 متر. وبالتالي تقدر تنضف بوردات صغيرة وأرجل الشرائح.

المميزات

• عرض 2 مم
• طول 1.5 متر
• بتشيل اللحام بسرعة
• مناسبة للشغل الدقيق

الاستخدامات

• تنضيف البوردات الصغيرة
• إزالة القصر بين أرجل الشرائح
• نزع القطع الصغيرة
• صيانة الموبايل والبوردات

استخدم فلكس لنتيجة أسرع، وقص الجزء المستخدم كل مرة.

محتاج اختيارات تانية؟ تصفح باقي solder wire flux & wick عندنا في Electrolik.